Differences
This shows you the differences between two versions of the page.
Next revision | Previous revision | ||
xro:lothrelectronicsstation [2019-01-13 04:24] xro created |
xro:lothrelectronicsstation [2019-02-03 14:24] (current) 54.36.148.244 ↷ Links adapted because of a move operation |
||
---|---|---|---|
Line 1: | Line 1: | ||
- | {{ :xro:loetstationlabornetzteillothrbox2.svg |}} | + | {{tag>project}} |
+ | ===== LoTHR mini Electronics Soldering Station ===== | ||
+ | |||
+ | === Parts === | ||
+ | |||
+ | * [[https://www.aliexpress.com/item/DP30V5A-Constant-Voltage-current-Programmable-Power-Step-down-Supply-module-Ammeter-buck-regulator-converter-voltmeter/32656627324.html | DP30V5A/DSV3005]] | ||
+ | * [[https://www.aliexpress.com/store/product/KSGER-T12-Soldering-Iron-Station-MIni-STM32-OLED-V2-01-DIY-Kits-FX9501-Electric-Tools-Aluminum/1486111_32948842049.html | KSGER T12 mini Soldering Station]] | ||
+ | * Backside Switch re-used on front | ||
+ | * [[https://www.thingiverse.com/thing:2817722 | T12 Tip Holder]] | ||
+ | * [[https://www.conrad.at/de/schuetzinger-seb-6452-ni-sw-sicherheits-laborbuchse-buchse-einbau-vertikal-stift-o-4-mm-schwarz-1-st-1537941.html| 4x Safety Laboratory Banana Jack]] | ||
+ | * old external SCSI HDD Case | ||
+ | * 2x 5pin Jumper-Wire Jack | ||
+ | * Switching power supply 24V / 3.2A, set to ~27V | ||
+ | * [[https://de.aliexpress.com/item/35-watt-elektronische-last-einstellbare-konstante-strom-aging-widerstand-batterie-spannung-kapazit-t-tester-LCD-spannung/32954356498.html | XY-FZ35 Electronic Load]] | ||
+ | * 1x USB Serial TTL Converter | ||
+ | * 3x Jumper Wires | ||
+ | |||
+ | === Manual === | ||
+ | |||
+ | [[realraum:minielectronicsworkstationmanual]] | ||
+ | |||
+ | === Photos === | ||
+ | |||
+ | https://galley.realraum.at/index.php?/category/184 | ||
+ | |||
+ | === Blog Posts === | ||
+ | |||
+ | * https://wp.realraum.at/2019/01/lothr-mini-electronics-workbench/ | ||
+ | * https://wp.realraum.at/2019/02/lothr-mini-electronics-workbench-upgrade/ | ||
+ | |||
+ | |||
+ | === Front === | ||
+ | |||
+ | The front was lasercut to accommodate the different devices. | ||
+ | |||
+ | * Black: cut with 90% 60W at 10mm/s | ||
+ | * Red: scan-engraved with 18% 60W at 100mm/s | ||
+ | |||
+ | {{ :xro:loetstationlabornetzteillothrbox3.svg |}} |
realraum Graz, Brockmanngasse 15, 8010 Graz, realraum - Verein für Technik in Kultur und Gesellschaft